宏旭预制阶梯式生态护坡模具 阶梯式生态护坡模具

在预制阶梯式生态护坡模具，有一点比较重要的是初次接触此类生产护坡模具的时候，往往在具体操作上会存在很多疑点，尤其是模具的脱模问题，因为该模具与其他钢模具不同的是内部呈现空心构造，所以如何保证将完整的预制阶梯式生态护坡模具脱模不来，而混凝土预制块不会发生损害，是厂家对于预制厂或者生产此类预制块的施工单位责任体现。那么如果在预制阶梯式生态护坡模具使用程序里面，脱模一项是如何操作的呢？按照厂家实际提供的可靠性参考经验，往往在混凝土凝固以后，先是将两侧的模板打开(模具四周都是可以打开的)，然后将模具倒过来后，拆掉另外一块主板（仿石花纹的这块不能动），然后将内模吊装出来后将仿石花纹这块拆掉，这样就形成了完成的阶梯式护坡砖。这种拆模仿石也摒弃了过去直接将预制块吊装出来的方式，更加完整的保留预制块与图纸的相同，从而在表面效果以及使用安装效果上都达到非常好的一个状态。In the prefabrication of the ladder type ecological slope protection mould, it is more important that there are many doubts in the specific operation, especially the demoulding problem of the mould, because the mould is different from other steel moulds in that the internal structure is hollow, so how to ensure that the complete prefabricated ladder type ecological slope protection mould can not be demoulded The concrete precast block will not be damaged, which is the responsibility of the manufacturer for the precast plant or the construction unit that produces such precast block. So how to operate demoulding in the application procedure of prefabricated ladder type ecological slope protection mould? According to the actual reliability reference experience provided by the manufacturer, after the concrete is solidified, the formworks on both sides are usually opened (all around the mold can be opened), then the mold is reversed, and another main board is removed (the stone like pattern cannot move), and then the internal mold is hoisted out, and the stone like pattern is removed, thus forming a finished stepped slope protection Bricks. This kind of demoulding imitation stone also abandons the way of directly lifting the precast block out in the past, and more completely retains the same precast block as the drawing, so as to achieve a very good state in the surface effect and the use and installation effect.